Tektronix P5200A Instruction Manual page 41

Accessories
Tektronix 1103 Probe Power
Supply.
Use the 1103 power supply
for performing service procedures on the
P5202A, P5205A, and P5210A probes.
The 1103 power supply provides power to
the probe and routes the probe output signal
through a BNC connector on the front panel
of the supply.
Order Tektronix part number:
1103
Replacement Label (Safety Item;
Service Only).
This reusable label covers
the openings to the service-only adjustments
on the back of the probe. To maintain
the safety of the probe, the label must be
replaced after service adjustments are made
to the probe.
If the original label becomes damaged or
lost, order a replacement label.
NOTE. This label is only replaceable on
units with serial numbers C020000 and
above
Order Tektronix part number:
335-2913-xx
P5200A Series High Voltage Differential Probes Instruction Manual 22