Tektronix P5200A Instruction Manual page 37

Extended Test Probe Adapters
These adapters screw on to the threaded tips
of the handheld probes.
Use these adapters to reach into dense
circuitry. The sharp tips can contact small
component leads and circuit board features.
WARNING. The probe input rating is derated
to 300 V CAT II, 1 mA, when used with the
THDP and TMDP series probes. Do not
use this extended probe adapter to measure
voltages that exceed this rating.
WARNING. The tip on this adapter is very
sharp. To prevent injury, do not touch the tip.
Maximum ratings:
300 V CAT II
3 A
Order Tektronix part number:
012-1724-xx (one pair)
Crocodile Clips
The crocodile clips connect easily to large
bolts or bus bars. The connectors are double
insulated for safety. The clips screw on to the
threaded tips of the handheld probes.
Maximum ratings:
1000 V CAT III
10 A
One pair of clips is included with the probes.
Order Tektronix part number:
344-0670-xx (one pair)
P5200A Series High Voltage Differential Probes Instruction Manual
Accessories
18