Configuring San Admin Users - Cisco Nexus 5000 Series Configuration Manual

Configuring User Accounts and RBAC

Configuring SAN Admin Users

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
This example shows how to configure a SAN admin user and display the user account and SNMP user
configuration:
switch# configure terminal
switch(config)# username user1 role san-admin password xyz123
switch(config)# show user-account
user:admin
user:user1
switch(config) # show snmp user
________________________________________________________________________
________________________________________________________________________
User
____
admin
user1
________________________________________________________________________
NOTIFICATION TARGET USES (configured for sending V3 Inform)
________________________________________________________________________
User
____
switch(config) #
Command or Action
switch# configure terminal
switch(config) # username user-id role
san-admin password password
switch(config) # show user-account
switch(config) # show snmp-user
switch(config)# copy running-config
startup-config
this user account has no expiry date
roles:network-admin
this user account has no expiry date
roles:san-admin
SNMP USERS
Auth Priv(enforce)
____ _____________
md5 des(no)
md5 des(no)
Auth Priv
____ ____
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
Purpose
Enters global configuration mode.
Configures SAN admin user role access for the
specified user.
(Optional)
Displays the role configuration.
(Optional)
Displays the SNMP user configuration.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to
the startup configuration.
Groups
______
network-admin
san-admin
Configuring SAN Admin Users
75