How To Order; Drive Configurator; Fc Identification - Danfoss VLT FC51 Design Manual

How to Order

®
VLT Micro Drive FC 51 Design Guide
5 How to Order

5.1 Drive Configurator

It is possible to design a frequency converter according to
the application requirements by using the ordering
number system.
Frequency converters can be ordered as standard or with
internal options by using a type code string, that is,
5 5
FC051PXXXXXXXXHXXXXXXXSXXX
Use the Internet-based Drive Configurator to configure the
right frequency converter for the right application and
generate the type code string. The Drive Configurator
automatically generates an 8-digit sales number (either for
one product or a project list with several products) to be
delivered to your local sales office.
The Drive Configurator can be found on: www.danfoss.com/
drives.

5.2 FC Identification

The nameplate sticker is located on the top of each
frequency converter and shows the ratings, serial number,
warnings catalog number, and other relevant data for each
unit. See Table 5.2 for details, how to read the type code
string.
Illustration 5.1 Nameplate Sticker
MG02K302 - Rev. 2013-12-03 39