Fc 51 Type 1 Kit Mounting Instruction For M1, M2 And M3; Fc 51 Type 1 Kit Mounting Instruction For M4 And M5; Mg02K302 - Rev. 2013-12-03 - Danfoss VLT FC51 Design Manual

Selection
4.1.8 FC 51 Type 1 Kit Mounting Instruction
for M1, M2 and M3
Step 1
Mount metal plate on frequency converter and tighten the
screws. Tightening torque: 2 Nm.
4 4
M1
M2
M3
Table 4.5 Conduit Sizes
Illustration 4.10 Mount Metal Plate on Frequency Converter
Step 2
Fit bottom cover on frequency converter and tighten
screw.
Illustration 4.11 Fit Bottom Cover on Frequency Converter
30
®
VLT Micro Drive FC 51 Design Guide
4 x ½"
5 x ½ "
2 x ½"
3 x 3/4"

MG02K302 - Rev. 2013-12-03

4.1.9 FC 51 Type 1 Kit Mounting Instruction
for M4 and M5
Step 1
Mount metal plate on frequency converter and tighten the
screws. Tightening torque: 2 Nm.
M4 3x½"
M5 3x1"
Table 4.6 Conduit Sizes
Illustration 4.12 Mount Metal Plate on Frequency Converter
Step 2
Fit bottom cover on frequency converter and tighten
screw.
Illustration 4.13 Fit Bottom Cover on Frequency Converter