Table of Contents
Advertisement
4
ADVANCED
FEATURES
1-13
Sending
Abnormally
Thick or Large Sheets
Using the manual feed feature, you can ex-
tend the maximum
document
width to A2
[23.4"] width, and the maximum
document
thickness
to 0.4 mm [16 roils]. Manual feed
should also be used for thinner
pages than
normal.
If you wish tosendan
original
that is thicker
than
the recommended
maximum
thick-
ness, you can send it as follows.
1. Push
the
manual
feed
button
while placing
the document
in the
feeder.
Notes:
1. Push the document
in until docu-
ment feed starts.
2. Place
only
one
sheet
in the
feeder.
2. Dial the destination
address,
then
press
Yes
3. Press
Start
If you have more than one original, place it in
the feeder immediately
after the trailing edge
of the previous
sheet has been fed in.
1.
2.
3.
4.
A2
.S~ze
Note that two calls are needed to send a very wide original.
(see page 62 for more on Batch Transmission).
pjyiynmj
You can also transmit an original that is wider
than the document
guide; fold it in half and
use the manual feed lever, as follows:
Be sure to use Memory
transmission
(the
Memory indicator
must be lit).
Fold the original
in half.
Push the manual
feed button while
placing
the folded
document
in the
feeder.
Note: Push the document
in until document
feed starts.
Dial,
press
Yes
,
and
press
Start
After
the
original
has
been
fed
through,
place
it in the
feeder
again, the other side facing
down.
To use just one call, use Batch Transmission
1.
Store the second half of the message
using Memory Transmission
and Send Later (use Speed Dial
or Quick Dial or this procedure
will not work).
2.
Store the first half of the message
using Memory Transmission,
but not using Send Later.
The machine
will send the first half, then the second half, without disconnecting
the line.
61
Advertisement
Table of Contents
