Configuration By Programming - Panasonic FP7 Series User Manual

6.8 Configuration by Programming

■
Overview of functions
● The thermocouple multi-analog input unit and the RTD input unit make it possible to
overwrite configuration information by programming.
● The configuration information is refreshed by writing "55AA" to unit memory UM 00028 after
the value is stored in the unit memory where a desired parameter is set.
● The value of unit memory UM00028 will be set to "0" when the configuration information is
refreshed.
■
Sample program
Program setting the input range of CH0/CH1 to the thermocouple input K1 range (-100 to
600°C) and CH2 and CH3 as non-execution channel for the thermocouple multi-analog input
unit in the slot number 1.
R0
DF
（ （ ） ）
R0
DF
（ （ ） ）
R1
R1
R2
DF
（ （ ） ）
R3
WUME-FP7TCRTD-04
MV.US
MV.US
MV.US
MV.US
MV.US
R2
S1:UM00028 =.US
MV.SS
MV.SS

6.8 Configuration by Programming

H0010 S1:UM00081
H0010 S1:UM00091
H0000 S1:UM000A0
H0000 S1:UM000B0
H55AA S1:UM00028
H0
R3
< SET
WX10 DT100
WX11 DT101
Sets CH0 and CH1 to
thermocouple (K1) range
Sets CH2 and CH3 to
non-execute
Setting update
R1
Setting updating in
progress
R2
Setting updated
>
Reads input data
6-17