Table of Contents
Advertisement
Unit Overview
Unit Face
Unit Face
Right
Right
Side
Side
The 10-pin connector allows access to several optically isolated inputs and relay
outputs. Inputs are available for selecting parameters, suspending and resetting the
unit. Outputs are available for cycle, batch and reject statuses.
The user interface on the AQ Wireless is
equipped with a 30 x 40 LCD display and
a 14 key ATM style "soft key" format. The
"soft" key's functions will change depending
upon the screen that is displayed. The keys
are used to navigate through menus, select
items that need to be edited, and to view
information related to the tools.
Above the LCD display, there are three
status indicators. The cycle status indicator
will light up each time a fastening process
is completed successfully. The batch status
indiction will be lit when the final fastener is
completed in a group. If a fastening process
is not completed properly, the reject status
indicator will illuminate.
The left side of the unit is populated with
a power entry module and a removable
plate. The AQ wireless contains an auto-
ranging power supply. That power supply is
capable of accepting voltages from 90VAC to
Left
Left
64VAC. Depending upon the configuration
Side
Side
of the unit, the plate on the left side may
have a USB connector and or additional
connectors.
A companion Windows application is
available that will make use of the USB port
and aide in the set-up of the unit.
The right side of the unit is populated with a
key-switch, beeper and a 10 pin connector.
The key-switch is used to bypass the
password screen allowing direct access to
the programmable functions.
The beeper can be programmed to beep on
rejects, cycles, batches or not at all.
- -
Advertisement
Table of Contents
