Din Rail Mounting - Siemens LOGO! CIM Operating Manual

4.1.2

DIN rail mounting

Mounting
To mount a CIM onto a DIN rail, follow these steps:
1. Hook the CIM onto the rail.
2. Push down the lower end to snap it on. The mounting interlock at the rear must engage.
Removal
To remove CIM, follow these steps:
1. Insert a screwdriver into the eyelet at the bottom of the slide interlock and move the latch
downward.
2. Swing the LOGO! CIM off the DIN rail.
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
Mounting and connecting the device
4.1 Mounting the device
25