Table of Contents
Advertisement
Camera web server interface
14.4.7 System
14.4.7.1 General
The System section displays the serial number and the part number of the camera. Here,
you can also restart the camera, reset the camera to factory default settings, and update
the camera firmware.
14.4.7.2 Procedure
To manage the system functions, follow this procedure:
1. Click on System. This displays the system functions.
2. To restart the camera, do the following:
2.1.
Click the Restart button. This displays a dialog box.
2.2.
In the dialog box, click the OK button.
3. To reset the camera settings to the factory default, do the following:
3.1.
Click the Restart button. This displays a dialog box.
3.2.
In the dialog box, click the OK button. This will affect all camera settings, in-
cluding regional settings. Saved images will not be affected. The camera will
restart.
4. To update the firmware via a file, do the following:
4.1.
Click the Choose file... button. This opens the standard Windows Open dialog
box.
4.2.
Browse to the location of the firmware file. Select the file and click the Open
button.
4.3.
By selecting the check box Force update, any error messages will be overrid-
den and the update will be installed even if you, for example, try to install an
older version of the firmware. Only select the check box if you know what you
are doing.
4.4.
Click the Upload button.
14.4.8 Firmware details
14.4.8.1 General
The Firmware details section displays information about the camera firmware: Package,
OS, Kernel, Boot, and Configuration.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
