FLIR AX8 User Manual page 149

1.12.3 Description of Class Attributes
Currently the camera is only enabled for one isotherm. In the future, there may be future instances for additional isotherms.
1.12.3-1 Max Instance
This attribute indicates how many isotherms are enabled in the camera and can be used.
1.12.4 Description of Instance Attributes
Currently the camera is only enabled for one isotherm. In the future, there may be future instances for additional isotherms.
1.12.4.1 Isotherm Enable
This attribute enables the isotherm control.
1.12.4.2 Isotherm Type
This attribute sets the type of the isotherm control. As of now, the acceptable values are "Below" and "Above".
1.12.4.3 Isotherm Level
This attribute sets the value of the isotherm low temperature limit in Kelvin.
1.12.4.4 Isotherm Color
This attribute sets the color of the isotherm. Acceptable values are "palette1", "palette2", "red", "green", "blue", "yellow",
"cyan", "magenta", and "gray".
©Real Time Automation, Inc.
FLIR Systems Object Model version 1.22
Implemented for
Service
code
Class level Instance level
0E Yes
Hex
10 No
Hex
09/15/2009
Service name
Yes Get_Attribute_Single
Yes Set_Attribute_Single