FLIR AX8 User Manual page 144

1.10.3-4 Write "ds" to ".image.ccase.query.ds"
Write the string "ds" into this attribute. Write 0x02 0x64 0x73 (the length of the string is in the first byte).
1.10.3-5 Write "ap" to ".image.ccase.query.ap"
Write the string "ap" into this attribute. Write 0x02 0x61 0x70 (the length of the string is in the first byte).
1.10.3-6 Write "fi" to ".image.ccase.query.fi"
Write the string "fi" into this attribute. Write 0x02 0x66 0x69 (the length of the string is in the first byte).
1.10.3-7 Case Query
This attribute will display the lens cases currently configured in the camera. For example, a response of 0x04 0x20 0x30 0x20
0x31 means that cases 0 and 1 have been found.
1.10.3-8 Current Temperature Range Case
This attribute will display the current temperature range case selected in the camera. To change the temperature range case, you
must first write the new temperature case in this attribute and then execute Attribute 107 (see 1.10.3-9).
1.10.3-9 Change Temperature Case
If a 0 is written, no change will occur. If a 1 is written, the current temperature range case will be overwritten by the case assigned
to Attribute 106 (see 1.10.3-8). Since this is a momentary toggle, the read will always return 0.
1.10.4 Description of Instance Attributes
Instance 1 corresponds to Case 0, Instance 2 corresponds to Case 1, etc...
1.10.4-1 Current Upper Limit Temperature
This attribute returns the upper limit temperature for a particular lens case in Kelvin.
1.10.4-2 Current Lower Limit Temperature
This attribute returns the lower limit temperature for a particular lens case in Kelvin.
1.10.4-3 Case Enabled
This attribute returns a value of 1 if this lens case has been calibrated for the camera, and returns a value of 0 if this lens case does
not exist in the camera.
©Real Time Automation, Inc.
FLIR Systems Object Model version 1.22
09/15/2009