Additional Float (F) Mappings - FLIR AX8 User Manual

Additional Float (F) mappings

To access Float (F) mappings of Objects 0x64-0x6F use the following information:
1. The file number can be calculated using the following formula:
File Number = (Object# + 100)
2. The file offset can be calculated using the following formula:
Beginning File Offset = ((Instance# * 4000) + ((Attribute# - 1) * 20) + 1)
3. Each attribute is allocated a length of 1 for the value. You will read/write the Beginning File Offset for a length of 1.
4. If a value is writeable, then the new value will be displayed when read next, else there was an error.
5. If the attribute is not a REAL or DINT value, then an error will appear.
Example reading Box 2 Min Temperature:
- File Number = 209
- Beginning File Offset = 8101
- Example Min Temperature is 302.25 Kelvin
F209:8101 = 302.25
©Real Time Automation, Inc.
FLIR Systems Object Model version 1.22
09/15/2009