Table of Contents
Advertisement
FLIR IP Config
16.1 Installation
16.1.1 General information
16.1.1.1 Explanation
The following programs are included on the application CD:
• FLIR IP Config: A setup and configuration program for detecting and finding FLIR au-
tomation and science cameras on a network and automatically assigning or manually
setting IP addresses.
• FLIR IR Monitor: A program for controlling FLIR automation and science cameras on
a network. You typically use FLIR IR Monitor to change camera settings, lay out meas-
urement tools on the screen, set up alarms, etc.
• FLIR IR Camera Player: A PC-based remote control and video player for infrared cam-
eras from FLIR Systems.
• A link to a web installation of FLIR Axxx Control & Image Interfaces: An installation
that includes Interface Control Documents (ICDs), user documentation, and C-code
examples. We recommend that you read through the documentation.
16.1.1.2 Default installation paths
• C:\Program Files\FLIR Systems\FLIR IP Config
• C:\Program Files\FLIR Systems\FLIR IR Monitor
• C:\Program Files\FLIR Systems\FLIR IR Camera Player
• C:\Program Files\FLIR Systems\FLIR Axxx Control & Image Interfaces
Note Functionality in the PC programs is dependent on the camera model.
16.1.2 System requirements
16.1.2.1 Operating system
• Microsoft Windows XP Professional, with Service Pack 2 (SP2).
• Microsoft Windows Vista Ultimate 32-bit.
• Microsoft Windows 7, 32-bit and 64-bit.
16.1.2.2 Hardware
• Personal computer with a 2 GHz 32-bit or 64-bit processor.
• 1 GB of RAM or more.
• 20 GB of hard disk space.
• Super VGA (1024 × 768) or higher-resolution monitor.
• Support for DirectX 9 graphics with:
◦ WDDM driver
◦ 128 MB of graphics memory (minimum)
◦ Pixel Shader 2.0 (in hardware)
◦ 32 bits per pixel.
• DVD-ROM drive.
• Audio output.
• Keyboard and Microsoft mouse, or a compatible pointing device.
16.1.2.3 Software
Microsoft Internet Explorer 6 or later.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
