Mounting Recommendations - Teltonika TAT240 Quick Manual

For example: if user is using Tamper to attach TAT to a surface
and want to detect its removal from it, "Removed from surface"
option should be selected. In extreme case, if the device
is removed not only from surface but the whole holder is
separated, "Removed" can be selected to detect it.
It should be noted that event records will be send with last
known coordinates. In order to also receive a record with
coordinates, switch Record type parameter to Event and Fix.
If user wants the device to start alarming rapidly about some
kind of tamper event it is advisable to use Tamper scenario
with Recovery Mode activation with short Recovery mode
period configured for fast reports.
Parameter IDs to be added to
TAT240_Parameter_list
PARAMETER
ID
NAME
Tamper
290
Detection
Tamper
Detection 291
Event
wiki.teltonika-gps.com/view/
VALUES
0 - disabled 1 -enabled
0 - Invalid value
1 - Removed
2 - Attached
4 - Attached on surface
8 - Removed from Surface
Other values are a sum of
different state numbers.
For example, if you want
to configure Removed
from Surface and Removed
together, just add state
numbers and the value will
be 9.
To detect all states, value is 15
Record type 292
Recovery
Mode
Triggering 293
Tamper
Event
MOUNTING
RECOMMENDATIONS
We recommend mounting the TAT240 in such a way that the
GNSS antenna is pointed at the sky and the device itself is not
covered by various obstructions that would interfere with the
reception of the GNSS fix.
0 - Event only
1 - Event and Fix
0 - None
1 - Removed
2 - Attached
3 - Attached on surface
4 - Removed from surface
Quick Manual v1.0 // TAT240 12