Table of Contents
Advertisement
▪ After all these steps press Save to device to save configuration.
▪ Now TMT250 device can be disconnected from the configurator.
5.12.2.2 Connecting Bluetooth Hands Free adapter
Turn on hands-free device and then turn on its Bluetooth connection for pairing following
your model instructions. Hands-free adapter should make a specific sound in the speakers or its
LED identification should inform about successful connection. To check if the adapter is
successfully connected, dial the TMT250 device phone number and the hands-free device should
start ringing. If you later restart TMT250 device it will automatically reconnect to this adapter.
5.12.3 Logging the TMT250 device using your mobile phone
Bluetooth starts automatically when TMT250 device is on. Take your mobile phone, go to
Settings->Bluetooth and turn it on. Scan for nearby devices, find the device in the list, distinguish
the device by last IMEI digits on device module. Press pair, wait until device asks to enter pairing
password, type: "5555" (as in the example on the Figure 24). Paired device will show up in the
paired device list. Download a terminal for Bluetooth e.g. BlueTerm from Play Store/App store.
Run app, click Find->Connect to your paired device. Now we need to send a command to
TMT250 from Bluetooth terminal, type: ".log:1". Device will respond with "Debug enabled" and
TMT250 log will show up. Do not forget to save the log file to mobile phone.
Figure 26 Incoming Call Action settings
43
Advertisement
Table of Contents
