Sntp Authentication Enable - H3C S5830V2 Series Command Reference Manual

Syntax
display sntp sessions
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display brief information about all SNTP associations.
<Sysname> display sntp sessions
SNTP server
1.0.1.11
Table 23 Output description
Field
SNTP server
Stratum
Version
Last receive time

sntp authentication enable

Use the sntp authentication enable command to enable SNTP authentication.
Use the undo sntp authentication enable command to disable SNTP authentication.
Syntax
sntp authentication enable
undo sntp authentication enable
Default
SNTP authentication is disabled.
Views
System view
Predefined user roles
network-admin
Stratum Version
2 4
Description
SNTP server (NTP server)
Stratum level of the NTP server, which determines the clock accuracy. It is in the
range of 1 to 16. A lower stratum level represents higher clock accuracy. A clock
with stratum level 16 is not synchronized.
SNTP version
Time when the last message was received:
•
Synced means the local clock is synchronized to the NTP server.
•
No packet was received means the device has not received any SNTP message
from the server.
Last receive time
Tue, May 17 2011 9:11:20.833 (Synced)
64