Display Logbuffer Summary - H3C S5830V2 Series Command Reference Manual

The rest is omitted here.
Table 26 Output description
Field
Log buffer
Max buffer size
Actual buffer size
Dropped messages
Overwritten messages
Current messages
Related commands
info-center logbuffer
•
• reset logbuffer

display logbuffer summary

Use the display logbuffer summary command to display the summary of the log buffer.
Syntax
display logbuffer summary [ level severity | slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level severity: Displays the summary of the log buffer, where severity represents information level, which
ranges from 0 to 7. For more information about log levels, see
option indicates that logs of all levels recorded in the log buffer are displayed.
slot slot-number: Specifies the ID of the IRF member device.
Examples
# Display the summary of the log buffer.
<Sysname> display logbuffer summary
SLOT EMERG ALERT
1
2
3
4
CRIT ERROR
0 0 0 7
0 0 0 0
0 0 0 0
0 0 0 0
Description
•
Enabled—Logs can be output to the log buffer.
•
Disabled—Logs cannot be output to the buffer.
Maximum capacity of the Log buffer.
Actual capacity of the log buffer.
Number of dropped messages. Messages are
dropped if memory allocation fails or the allocated
size of the log buffer is not big enough.
Number of overwritten messages. When the buffer
size is not big enough to hold all messages, the latest
messages overwrite the old ones.
The number of current messages in the log buffer.
WARN NOTIF INFO DEBUG
0 34 38
0 0 0
0 0 0
0 0 0
73
Table 25. Absence of the level severity
0
0
0
0