H3C S5830V2 Series Command Reference Manual page 47

Field
Reference clock ID
VPN instance
Local mode
local poll interval
Peer mode
peer poll interval
Offset
roundtrip delay
dispersion
Root roundtrip delay
root dispersion
Reachabilities
Description
Reference clock ID of the NTP server.
•
If the reference clock is the local clock, the value of this field is
related to the value of the Clock stratum field:
When the value of the Clock stratum field is 0 or 1, this field is
displayed as "LOCL."
When the Clock stratum field has another value, this field is
displayed as the IP address of the local clock.
•
If the reference clock is the clock of another device on the
network, this field is displayed as the IP address of the device.
VPN instance to which the NTP server belongs. If the NTP server is
in a public network, the field is displayed as Not specified.
Operation mode of the local device:
•
unspec—The mode is unspecified.
•
active—Active mode.
•
passive—Passive mode.
•
client—Client mode.
•
server—Server mode.
•
broadcast—Broadcast or multicast server mode.
•
bclient—Broadcast or multicast client mode.
Polling interval of the local device, in seconds. The value displayed
is a power of 2. For example, if the displayed value is 6, the poll
interval of the local device is 2
Operation mode of the peer device, including
•
unspec—The mode is unspecified.
•
active—Active mode.
•
passive—Passive mode.
•
client—Client mode.
•
server—Server mode.
•
broadcast—Broadcast or multicast server mode.
•
bclient—Broadcast or multicast client mode.
Polling interval of the peer device, in seconds. The value displayed
is a power of 2. For example, if the displayed value is 6, the poll
interval of the local device is 2
Offset of the system clock relative to the reference clock, in
milliseconds
Roundtrip delay from the local device to the NTP server, in
milliseconds
Maximum error of the system clock relative to the reference clock
Roundtrip delay from the local device to the primary reference
source, in milliseconds
Maximum error of the system clock relative to the primary reference
clock, in milliseconds
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
39
6 , or 64 seconds.
6 , or 64 seconds.