Display Ntp-Service Sessions - H3C S5830V2 Series Command Reference Manual

Field
Xmttime
Filter order
Reference clock status
Total sessions

display ntp-service sessions

Use the display ntp-service sessions command to display information about all IPv4 NTP associations.
Syntax
display ntp-service sessions [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information about all IPv4 NTP associations. If you do not specify this
keyword, only brief information about the NTP associations is displayed.
Usage guidelines
When a device is operating in NTP broadcast or multicast server mode, the display ntp-service sessions
command does not display the IPv4 NTP association information corresponding to the broadcast or
multicast server, but the associations are counted in the total number of associations.
Examples
# Display brief information about all IPv4 NTP associations.
<Sysname> display ntp-service sessions
source
********************************************************************************
[12345]LOCAL(0)
Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.
Total sessions: 1
Description
Transmit timestamp in the NTP message
Dispersion information
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total number of associations
reference stra reach poll
LOCL
36
now offset
0 1 64 - 0.0000 0.0000 7937.9
delay disper