Display Process - H3C S5830V2 Series Command Reference Manual

Table 1 Output description
Field
The statistics about memory
is measured in KB:
Slot
Mem
Total
Used
Free
shared
buffers
cached
-/+ buffers/cache
Swap

display process

Use the display process command to display state information about a process.
Syntax
display process [ all | job job-id | name process-name ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays the state information about all processes.
job job-id: Specifies a job ID that uniquely identifies a process. It remains the same even if the process
restarts. The job-id argument is in the range of 1 to 2147483647.
name process-name: Specifies the process name. It is a case-insensitive string of 1 to 15 characters
without the question mark (?) and space.
slot slot-number: Specifies an IRF member device ID. If this option is not specified, the command displays
state information about processes on the master device.
Examples
# Display state information about the process scmd.
<Sysname> display process name scmd
Description
Memory statistics, in KB
ID of the IRF member device
Memory usage information
Size of the physical memory
Size of the physical memory used
Size of the free physical memory
Total memory shared by multiple processes
Size of buffers
Size of the cache
-/+ buffers/cache: used = Mem: used – Mem: buffers – Mem: cached
-/+ buffers/cache: free = Mem: used + Mem: buffers + Mem: cached
Swap usage information
Job ID: 1
PID: 1
3