H3C S5830V2 Series Command Reference Manual page 37

-w timeout: Specifies the timeout time of the reply packet of a probe packet. The timeout argument is in
the range of 1 to 65535 milliseconds. The default value is 5000 milliseconds.
host: IP address or host name (a string of 1 to 255 characters) for the destination.
Usage guidelines
After having identified network failure with the ping command, use the tracert command to locate the
failed node(s).
The output information for the tracert command includes IP addresses of all the Layer 3 devices the
packets traverse from source to destination. Asterisks (* * *) are displayed if the device cannot reply with
an ICMP error message (probably because the destination is unreachable or sending ICMP
timeout/destination unreachable packets is disabled).
To abort the tracert operation during the execution of the command, press Ctrl+C.
Examples
# Display the path that the packets traverse from source to destination with an IP address of 1.1.2.2.
<Sysname> tracert 1.1.2.2
traceroute to 1.1.2.2(1.1.2.2), 30 hops at most, 40 bytes each packet, press CTRL_C to
break
1 1.1.1.2 673 ms 425 ms 30 ms
2 1.1.2.2 580 ms 470 ms 80 ms
# Trace the path to destination 192.168.0.46 over an MPLS network.
<Sysname> tracert 192.168.0.46
traceroute to 192.168.0.46(192.168.0.46), 30 hops at most, 40 bytes each packet, press
CTRL_C to break
1 192.0.2.13 (192.0.2.13)
2 192.0.2.9 (192.0.2.9)
MPLS Label=100048 Exp=0 TTL=1 S=1
3 192.0.2.5 (192.0.2.5)
MPLS Label=100016 Exp=0 TTL=1 S=1
4 192.0.2.1 (192.0.2.1)
Table 14 Output description
Field
traceroute to 1.1.2.2(1.1.2.2)
hops at most
bytes each packet
press CTRL_C to break
1 1.1.1.2 673 ms 425 ms 30
ms
0.661 ms 0.618 ms
0.861 ms 0.718 ms
0.822 ms 0.731 ms
0.961 ms 8.676 ms
Description
Display the route the IP packets traverse from the current device to the device
whose IP address is 1.1.2.2.
Maximum number of hops of the probe packets, which can be set through the
-m keyword.
Number of bytes of a probe packet.
During the execution of the command, press Ctrl+C to abort the tracert
operation.
Probe result of the probe packets whose TTL is 1, including the IP address of
the first hop, and the roundtrip time of three probe packets.
The number of packets that can be sent in each probe can be set through the
-q keyword.
29
0.579 ms
0.679 ms
0.708 ms
0.875 ms