H3C S5830V2 Series Command Reference Manual page 135

Usage guidelines
You can configure a remote probe VLAN only for a remote source group or remote destination group but
not for a local mirroring group.
When a VLAN is configured as a remote probe VLAN, use the remote probe VLAN for port mirroring
exclusively.
The remote mirroring groups on the source device and destination device must use the same remote
probe VLAN.
Only a static VLAN that already exists can be configured as a remote probe VLAN. A VLAN can be
configured as the remote probe VLAN for only one mirroring group.
To delete a VLAN that is configured as a remote probe VLAN, remove the remote probe VLAN
configuration first.
Examples
# Create remote source group 1, and configure VLAN 10 as its remote probe VLAN.
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 remote-probe vlan 10
# Create remote destination group 2, and configure VLAN 20 as its remote probe VLAN.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination
[Sysname] mirroring-group 2 remote-probe vlan 20
Related commands
mirroring-group
127