H3C S5830V2 Series Command Reference Manual page 39

ICMP error message (probably because the destination is unreachable or sending ICMP
timeout/destination unreachable packets is disabled).
To abort the tracert operation during the execution of the command, press Ctrl+C.
Examples
# Display the path the packets traverse from source to destination with IPv6 address 2001:3::2.
<Sysname> tracert ipv6 2001:3::2
traceroute to 2001:3::2(2001:3::2), 30 hops at most, 60 byte packets, press CTRL_C to break
1 2001:1::2
2 2001:2::2
3 2001:3::2
Table 15 Output description
Field
traceroute to 2001:3::2
hops at most
byte packets
1 2001:1::2 0.661 ms 0.618
ms 0.579 ms
0.661 ms 0.618 ms
0.861 ms 0.718 ms
0.822 ms 0.731 ms
Description
Display the route the IPv6 packets traverse from the current device to the
device whose IP address is 2001:3:2.
Maximum number of hops of the probe packets, which can be set through
the -m keyword.
Number of bytes of a probe packet.
Probe result of the probe packets whose hoplimit is 1, including the IPv6
address of the first hop, and the roundtrip time of three probe packets.
Number of packets that can be sent in each probe can be set through the
-q keyword.
0.579 ms
0.679 ms
0.708 ms
31