Display Logbuffer - H3C S5830V2 Series Command Reference Manual

Field
Monitor
Log host: Enabled
IP address: 192.168.0.1, port number: 5000, host
facility: local7
IP address: 192.168.0.2, port number: 5001, host
facility: local5
Log buffer: Enabled
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0,
overwritten messages 0
Log file
Information timestamp format:
Loghost: Date
Other output destination: Date

display logbuffer

Use the display logbuffer command to display the state of the log buffer and the logs recorded.
Syntax
display logbuffer [ reverse ] [ level severity | size buffersize | slot slot-number ] *
Views
Any view
Description
Monitoring terminal state:
•
Enabled—Logs can be output to the monitoring
terminal.
•
Disabled—Logs cannot be output to the monitoring
terminal.
Log host configuration (This information is displayed
only when a log host and related parameters are
configured):
•
Enabled—Logs can be output to the log host.
•
Disabled—Logs cannot be output to the log host.
•
IP address—IP address of the log host.
•
port number—Port number on the log host.
•
host facility—Facility used by the log host.
Log buffer configuration:
•
Enabled—Logs can be output to the log buffer.
•
Disabled—Logs cannot be output to the log buffer.
•
Max buffer size—Maximum capacity of the log
buffer.
•
current buffer size—Current capacity of the log
buffer.
•
Current messages—Current number of the
messages in the log buffer.
•
dropped messages—Number of dropped
messages.
•
overwritten messages—Number of overwritten
messages.
Log file state:
•
Enabled—Logs can be output to the log file.
•
Disabled—Logs cannot be output to the log file.
Time stamp configuration:
•
boot—Time since system startup.
•
date—Current date and time of the system.
•
iso—Time stamp format stipulated in ISO 8601.
•
none—No time stamp is included.
•
no-year-date—Current date and time without year
information.
71