Snmp-Agent Remote - H3C S5830V2 Series Command Reference Manual

Use the undo snmp-agent packet max-size command to restore the default packet size.
Syntax
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
Default
The SNMP agent can receive and send SNMP messages that are up to 1500 bytes long.
Views
System view
Predefined user roles
network-admin
Parameters
byte-count: Sets the maximum size (in bytes) of SNMP packets that the SNMP agent can receive or send.
The value range is 484 to 17940.
Usage guidelines
If any device on the path to the NMS does not support packet fragmentation, limit the SNMP packet size
to prevent large-sized packets from being discarded. For most networks, the default value is sufficient.
Examples
# Set the maximum SNMP packet size to 1024 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1024

snmp-agent remote

Use the snmp-agent remote command to configure the SNMP engine ID of a remote SNMP entity.
Use the undo snmp-agent remote command to delete a remote SNMP engine ID.
Syntax
snmp-agent remote ip-address engineid engineid
undo snmp-agent remote ip-address
Default
No remote SNMP engine ID has been configured.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of a remote SNMP entity.
engineid: Specifies the SNMP engine ID of the remote SNMP entity. This argument must be a
hexadecimal string that comprises an even number of characters, in the range of 10 to 64. All-zero and
all-F strings are invalid.
106