Mirroring-Group - H3C S5830V2 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for S5830V2 Series:
- Security configuration manual (332 pages) ,
- Configuration manual (318 pages) ,
- Command reference manual (301 pages)
Table of Contents
Advertisement
Table 35 Output description
Field
Mirroring group
Type
Status
Mirroring port
Monitor port
mirroring-group
Use the mirroring-group command to create a mirroring group.
Use the undo mirroring-group command to remove mirroring groups.
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a device.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Number of the mirroring group. The value ranges from 1 to 4.
local: Specifies a local mirroring group.
remote-destination: Specifies a remote destination group.
remote-source: Specifies a remote source group.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
Description
Number of the mirroring group
Type of the mirroring group:
•
Local
•
Remote source
•
Remote destination
Status of the mirroring group:
•
Active
•
Incomplete—The mirroring group is not configured completely and cannot
take effect.
Source port
Destination port
119
Advertisement
Table of Contents
