Info-Center Synchronous - H3C S5830V2 Series Command Reference Manual

Network management and monitoring
Hide thumbs Also See for S5830V2 Series:
Table of Contents

Advertisement

After you separately set the output rules for a module, you must use the module-name argument to
modify or remove the rules. The new configuration by using the default keyword is invalid on the
module.
Examples
# Output VLAN module's log information with a severity level of at least emergency to the console.
<Sysname> system-view
[Sysname] info-center source default console deny
[Sysname] info-center source vlan console level emergency
# Based on the previous configuration, disables the output of VLAN module's log information to the
console, that is, all logs are not output to the console.
<Sysname> system-view
[Sysname] undo info-center source vlan console

info-center synchronous

Use the info-center synchronous command to enable synchronous information output.
Use the undo info-center synchronous command to disable the synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
The synchronous information output is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Synchronous information output refers to the feature that if the user's operation is interrupted by a large
amount of system logs, then after the completion of system logs the system will display a command line
prompt (a prompt in command editing mode, or a [Y/N] string in interaction mode) and your input so
far, and you can continue your operations from where you were stopped.
Examples
# Enable the synchronous information output function, and then input the display interface
ten-gigabitethe command to view the Ethernet interface information.
<Sysname> system-view
[Sysname] info-center synchronous
Info-center synchronous output is on
[Sysname] display interface ten-gigabitethe
At this time, the system receives log messages, and it then displays the log messages first. After the system
displays all the log messages, it displays the user's previous input, which is display interface
ten-gigabitethe in this example.
%Apr 29 08:12:44:71 2007 Sysname IFNET/4/LINK UPDOWN:
Vlan-interface1: link status is UP
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5820v2 series

Table of Contents