Display Snmp-Agent Remote - H3C S5830V2 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for S5830V2 Series:
- Security configuration manual (332 pages) ,
- Configuration manual (318 pages) ,
- Command reference manual (301 pages)
Table of Contents
Advertisement
Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
View name: ViewDefault
MIB Subtree: snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
ViewDefault is the default MIB view. The output shows that except for the MIB objects in the snmpUsmMIB,
snmpVacmMIB, and snmpModules.18 subtrees, all the MIB objects in the iso subtree are accessible.
Table 31 Output description
Field
View name
MIB Subtree
Subtree mask
Storage-type
View Type
View status
Related commands
snmp-agent mib-view
display snmp-agent remote
Use the display snmp-agent remote command to display remote SNMP engine IDs configured by using
the snmp-agent remote command.
Syntax
display snmp-agent remote [ ip-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
MIB view name.
MIB subtree covered by the MIB view.
MIB subtree mask.
Type of the medium (see
Access privilege for the MIB subtree in the MIB view:
•
Included—All objects in the MIB subtree are accessible in the MIB view.
•
Excluded—None of the objects in the MIB subtree is accessible in the MIB view.
Status of the MIB view:
active—
•
MIB view is effective.
inactive—
•
MIB view is ineffective.
MIB views are active upon their creation at CLI. To temporarily disable a MIB view without
deleting it, you can perform an SNMP set operation to set its status to inactive.
Table
29) where the subtree view is stored.
93
Advertisement
Table of Contents
