Display Ntp-Service Trace - H3C S5830V2 Series Command Reference Manual

Field
Reference clock ID
Leap indicator
Clock jitter
Stability
Clock precision
Root delay
Root dispersion
Reference time

display ntp-service trace

Use the display ntp-service trace command to display the brief information of each NTP server from the
local device back to the primary reference source.
Syntax
display ntp-service trace
Description
For an IPv4 NTP server:
The field represents the IP address of the remote server when the
local device is synchronized to a remote NTP server.
The field represents the local clock when the local device uses the
local clock as a reference source.
•
When the local clock has a stratum level of 1, this field is
displayed as "Local";
•
When the local clock has any other stratum, this field is
displayed as the IP address of the local clock.
For an IPv6 NTP server:
The field represents the MD5 digest of the first 32 bits of the IPv6
address of the remote server when the local device is
synchronized to a remote IPv6 NTP server.
The field represents the local clock when the local device uses the
local clock as a reference source.
•
When the local clock has a stratum level of 1, this field is
displayed as "Local."
•
When the local clock has any other stratum, this field is
displayed as the MD5 digest of the first 32 bits of the IPv6
address of the local clock.
Alarming status:
•
00—Normal.
•
01—Leap second, indicates that the last minute in a day has
61 seconds.
•
10—Leap second, indicates that the last minute in a day has
59 seconds.
•
1 1—Time is not synchronized.
Difference between the system clock and reference clock, in
seconds.
Clock frequency stability. A lower value represents better
stability.
Accuracy of the system clock
Roundtrip delay from the local device to the primary reference
source, in milliseconds
Maximum error of the system clock relative to the primary
reference source, in milliseconds
Reference timestamp
42