Preface
The H3C S5830V2 & S5820V2 documentation set includes 10 command references, which describe the
commands and command syntax options available for the H3C S5830V2 & S5820V2 Switch Series.
The Network Management and Monitoring Command Reference describes network management and
monitoring configuration commands. It covers the commands for viewing system information,
synchronizing time for all devices with clocks in your network, and checking and debugging the current
network connectivity with the ping, tracert, and debug commands.
This preface includes:
Audience
•
Release-over-release command differences
•
Conventions
•
About the H3C S5830V2 & S5820V2 documentation set
•
•
Obtaining documentation
Technical support
•
Documentation feedback
•
Audience
This documentation is intended for:
•
Network planners
Field technical support and servicing engineers
•
Network administrators working with the S5830V2 & S5820V2 series
•
Release-over-release command differences
This documentation set is for Release 2108 and Release 2108P02. The following table describes the
command changes in Release 2108P02 over Release 2108:
Command reference
Ping, tracert, and system debugging
NTP
Information center
SNMP
Port mirroring
Added and modified commands in Release 2108P02
None.
None.
•
New commands: terminal debugging.
•
Modified commands: Replaces the keywords emergencies, alerts,
errors, warnings, and notifications with emergency, alert, error,
warning, and notification, respectively for the commands
info-center source and terminal logging level.
None.
None.