Info-Center Timestamp - H3C S5830V2 Series Command Reference Manual

[Sysname] display interface ten-gigabitethe
After the above information is displayed, you can input rnet to complete your input of the display
interface ten-gigabitethernet command, and then press the Enter key to execute the command.
# Enable the synchronous information output function, and then save the current configuration (input
interactive information).
<Sysname> system-view
[Sysname] info-center synchronous
Info-center synchronous output is on
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the logs, and it then displays the logs first. After the system displays all
the logs, it displays [Y/N].
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]:
After the above information is displayed, you can input Y or N to complete your input before the output
of the logs.

info-center timestamp

Use the info-center timestamp command to configure the time stamp format of the logs sent to console,
monitor, log buffer, and log file.
Use the undo info-center timestamp command to restore the default.
Syntax
info-center timestamp { boot | date | none }
undo info-center timestamp
Default
The time stamp format of the logs sent to console, monitor terminal, log buffer, and log file is date.
Views
System view
Predefined user roles
network-admin
Parameters
boot: Specifies the time taken to boot up the system, in the format of xxx.yyy, in which xxx represents the
most significant 32 bits of the time taken to boot up the system (in milliseconds) whereas yyy is the least
significant 32 bits. For example, 0.21990989 equals Jun 25 14:09:26:881 2007.
date: Specifies the current system date and time, in the format of "MMM DD hh:mm:ss:xxx YYYY". For
example, Dec 8 10:12:21:708 2007.
MMM: The abbreviations of the months in English, which could be Jan, Feb, Mar, Apr, May, Jun,
•
Jul, Aug, Sep, Oct, Nov, or Dec.
• DD: The date, starting with a space if less than 10, for example " 7".
hh:mm:ss:xxx: The local time, with hh ranging from 00 to 23, mm and ss ranging from 00 to 59,
•
and xxx ranging from 0 to 999.
84