Terminal Debugging - H3C S5830V2 Series Command Reference Manual

Examples
# Enable the monitoring of logs on the current terminal.
<Sysname> terminal monitor
The current terminal is enabled to display logs.

terminal debugging

Use terminal debugging to enable the display of debugging information on the current terminal
(console/monitor terminal).
Use undo terminal debugging to disable the display of debugging information on the current terminal
(console/monitor terminal).
Syntax
terminal debugging
undo terminal debugging
Default
The display of debugging information is enabled on the console and disabled on the monitor terminal.
Views
User view
Predefined user roles
network-admin
Usage guidelines
You can use either terminal logging level 7 or terminal debugging to enable the display of debugging
information on the current terminal, but the two commands have the following differences:
If you execute the terminal logging level 7 command, all log information with a severity value from
•
0 to 7 of can be output to the current terminal.
If you execute the terminal debugging command, only log information with a severity value
•
configured by the terminal logging level command and debugging information with a severity level
of 7 can be output to the current terminal.
The configuration of this command is only valid for the current connection between the terminal and the
device. When the current connection expires, or a new connection is established, the display of
debugging information on the terminal restores the default.
Examples
# Enable the display of debugging information on the current terminal.
<Sysname> terminal debugging
The current terminal is enabled to display debugging logs.
Related commands
terminal logging level
•
• terminal monitor
88