H3C S5830V2 Series Command Reference Manual page 77
Network management and monitoring
Hide thumbs
Also See for S5830V2 Series:
- Security configuration manual (332 pages) ,
- Configuration manual (318 pages) ,
- Command reference manual (301 pages)
Table of Contents
Advertisement
Usage guidelines
When you specify an NTP server for the device, the device is synchronized to the NTP server, but the NTP
server is not synchronized to the device.
If you include vpn-instance vpn-instance-name in the undo ntp-service unicast-server command, the
command removes the NTP server with the IP address of ip-address in the specified VPN. If you do not
include vpn-instance vpn-instance-name in this command, the command removes the NTP server with the
IP address of ip-address in the public network.
Examples
# Specify NTP server 10.1.1.1 for the device, and configure the device to run NTP version 4.
<Sysname> system-view
[Sysname] sntp unicast-server 10.1.1.1 version 4
Related commands
sntp authentication enable
•
sntp authentication-keyid
•
sntp reliable authentication-keyid
•
69
Advertisement
Table of Contents
