Table of Contents
Advertisement
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=253 time=38 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=253 time=61 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=253 time=74 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=253 time=36 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=253 time=35 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 35/48/74 ms
The output shows that CE 1 and CE 2 can reach each other.
Verify the configuration
7.
# Perform the display mpls lsp verbose command on PE 1. You can find an LSP with LspIndex 2050.
This is the LSP, that is, the MPLS TE tunnel, established using CR-LDP.
[PE1] display mpls lsp verbose
------------------------------------------------------------------
------------------------------------------------------------------
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Tunnel ID
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
------------------------------------------------------------------
------------------------------------------------------------------
No
VrfIndex
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Tunnel ID
LsrType
LSP Information: CRLDP LSP
:
1
:
2.2.2.2
:
1
:
Tunnel4
:
3.3.3.3/32
:
10.0.0.2
:
NULL
:
1024
:
----------
:
POS2/1/2
:
2050
:
0x22004
:
Ingress
:
Not Exists
:
Tunnel Index[---]
:
1500
LSP Information: BGP
:
2
:
vpn1
:
192.168.1.0/24
:
192.168.1.1
:
1024
:
NULL
:
----------
:
----------
:
8193
:
0x0
:
Egress
149
LSP
Advertisement
Table of Contents
Troubleshooting
