H3C SR8800 10G Mpls Configuration Manual page 119

Configuration procedure
Configure MPLS RSVP-TE basic capabilities
1.
# Configure Router A.
<RouterA> system-view
[RouterA] mpls lsr-id 1.1.1.1
[RouterA] mpls
[RouterA-mpls] mpls te
[RouterA-mpls] mpls rsvp-te
[RouterA-mpls] quit
[RouterA] interface GigabitEthernet 3/1/1
[RouterA-GigabitEthernet3/1/1] mpls
[RouterA-GigabitEthernet3/1/1] mpls te
[RouterA-GigabitEthernet3/1/1] mpls rsvp-te
[RouterA-GigabitEthernet3/1/1] mpls rsvp-te bfd enable
[RouterA-GigabitEthernet3/1/1] quit
# Configure Router B.
<RouterB> system-view
[RouterB] mpls lsr-id 2.2.2.2
[RouterB] mpls
[RouterB-mpls] mpls te
[RouterB-mpls] mpls rsvp-te
[RouterB-mpls] quit
[RouterB] interface GigabitEthernet 3/1/1
[RouterB-GigabitEthernet3/1/1] mpls
[RouterB-GigabitEthernet3/1/1] mpls te
[RouterB-GigabitEthernet3/1/1] mpls rsvp-te
[RouterB-GigabitEthernet3/1/1] mpls rsvp-te bfd enable
[RouterB-GigabitEthernet3/1/1] quit
Configure OSPF
2.
# Configure Router A.
<RouterA> system-view
[RouterA] ospf
[Router-A-ospf-1] area 0
[Router-A-ospf-1-area-0.0.0.0] network 12.12.12.1 0.0.0.255
[Router-A-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
[Router-A-ospf-1-area-0.0.0.0] quit
[Router-A-ospf-1] quit
# Configure Router B.
<RouterB>system-view
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 12.12.12.2 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
Configure IP addresses for the interfaces
3.
108