H3C SR8800 10G Mpls Configuration Manual page 136

3.3.3.3/32 3/NULL
[RouterD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 3/NULL
[RouterE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
3.3.3.3/32 1024/3
# Perform the display mpls te tunnel command on each router. You can find that two MPLS TE
tunnels are traversing Router B and Router C.
[RouterA] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[RouterB] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[RouterC] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[RouterD] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[RouterE] display mpls te tunnel
LSP-Id Destination
2.2.2.2:1 3.3.3.3
# Perform the display mpls lsp verbose command on Router B. You can find that the bypass tunnel
is bound with the protected interface GigabitEthernet 3/1/2 and is currently unused.
[RouterB] display mpls lsp verbose
-------------------------------------------------------------------
LSP Information: RSVP LSP
-------------------------------------------------------------------
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
POS2/1/1/-
In/Out IF
GE3/1/1/-
In/Out IF
POS2/1/1/POS2/1/2
In/Out-If
-/GE3/1/1
In/Out-If
GE3/1/1/GE3/1/2
-/POS2/1/1
In/Out-If
GE3/1/2/GE3/1/1
POS2/1/1/-
In/Out-If
GE3/1/1/-
In/Out-If
POS2/1/1/POS2/1/2
: 1
: 1.1.1.1
: 1
: Tunnel4
: 4.4.4.4/32
: 3.1.1.2
: 1024
: 1024
: GigabitEthernet3/1/1
: GigabitEthernet3/1/2
125
Vrf Name
Vrf Name
Name
Tunnel4
Name
Tunnel4
Tunnel5
Name
Tunnel4
Tunnel5
Name
Tunnel4
Name
Tunnel5