Virtual Serial Port; Assigning A Virtual Serial Port; Usb Options; Usb Control - HPE ProLiant Gen9 User Manual

Virtual Serial Port

Use this option to assign a logical COM port address and the associated default resources used by the Virtual
Serial Port (VSP). VSP enables the iLO Management Controller to appear as a physical serial port to support
the BIOS Serial Console and the operating system serial console.

Assigning a Virtual Serial Port

Prerequisite
For proper screen resolution, set the console resolution in the terminal software to 100x31.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > Serial Port Options > Virtual Serial Port and press Enter.
2. Select a setting and press Enter.
a. COM 1
b. COM 2
c. Disabled
3. Press F10.

USB Options

•

USB Control

• USB Boot Support
• Removable Flash Media Boot Sequence
• Embedded User Partition
• Internal SD Card Slot
• USB 3.0 Mode
USB Control
Use this option to configure how USB ports and embedded devices operate at startup.

Setting USB Control

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > USB Options > USB Control and press Enter.
2. Select a setting and press Enter.
42 Virtual Serial Port