Sata Secure Erase; Enabling Sata Secure Erase; Virtualization Options; Virtualization Technology - HPE ProLiant Gen9 User Manual

SATA Secure Erase

Use this option to control whether SATA Secure Erase functionality is supported. This function prevents the
Secure Freeze Lock command from being sent to SATA hard drives.

Enabling SATA Secure Erase

Prerequisites
• The SATA controller on the hard drive is in ACHI mode.
• The hard drive supports the Secure Erase command.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > SATA Controller Options > SATA Secure Erase and press Enter.
2. Select a setting and press Enter.
a. Enabled—The Security Freeze Lock command is not sent to supported SATA hard drives, enabling
Secure Erase to function.
b. Disabled—Disables Secure Erase.
3. Press F10.

Virtualization Options

•

Virtualization Technology

• Intel (R) VT-d
• SR-IOV
Virtualization Technology
Use this option to enable or disable Intel Virtualization Technology on a Virtual Machine Manager (VMM).
When enabled, a VMM supporting Virtualization Technology can use hardware capabilities provided by UEFI
Intel processors.
NOTE:
You do not need to disable Virtualization Technology if you are using a VMM or an operating system that
does not support AMD-V virtualization.

Enabling or disabling Virtualization Technology

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > System Options > Virtualization Options > Virtualization Technology and press Enter.
2. Select a setting and press Enter.
48 SATA Secure Erase