Enabling Consistent Device Naming; Mixed Power Supply Reporting; Enabling Or Disabling Mixed Power Supply Reporting; Serial Number - HPE ProLiant Gen9 User Manual

Enabling Consistent Device Naming

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Advanced System ROM Options > Consistent Device Naming and
press Enter.
2. Select a setting and press Enter.
a. CDN Support for LOMs only—Embedded NICs and FlexibleLOM (not NICs installed in expansion
slots) are named based on their locations in the system.
b. Disabled—All NIC ports are named based on their locations in the system.
3. Press F10.

Mixed Power Supply Reporting

Use this option to set whether the server logs messages when a mixed supply configuration is present.

Enabling or disabling mixed power supply reporting

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Advanced System ROM Options > Mixed Power Supply Reporting
and press Enter.
2. Select a setting and press Enter.
a. Enabled
b. Disabled
3. Press F10.

Serial Number

Use this option to re-enter the server serial number after replacing the system board. Consult a qualified IT
service specialist for assistance in modifying this value.

Re-entering a serial number

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Advanced System ROM Options > Serial Number and press Enter.
2. Enter the serial number and press Enter.
3. Press F10.
4. Press Enter.
Enabling Consistent Device Naming 125