Engineering Tool Settings - Mitsubishi Electric FX5 User Manual

Engineering Tool Settings

With GX Works3, this is done using the "Specify Connection Destination Connection1" screen.
Online[Current Connection Destination]
1.
Select "Ethernet Board" for "PC side I/F".
2.
Select "PLC Module" for "PLC side I/F".
Input the CPU IP address or host name in the "PLC side I/F Detailed Setting of PLC Module" screen as shown in the following
figure.
In case of host name, set the name specified in the Microsoft
1.
2.
3.
 
Windows hosts file.
4 CONNECTION WITH MELSOFT PRODUCT AND GOT
4.2 Connection via a hub
4
25