Mitsubishi Electric FX5 User Manual page 52

■Packet setting
Set the configuration of the send/receive packets on the "Packet Setting" window.
"Protocol Setting" window  Packet to be set
The above window opens when "Predefined Protocol Library" is selected on the "Add Protocol" window.
When "Add New" or "User Protocol Library" has been selected, configure the packets with the [Change Type] button and [Add
New] button.
For details on the packet elements, refer to the following.
Page 52 Packet Elements
■Writing the protocol setting data
Write the protocol setting data to the CPU module.
[Online]  [Write to Module]
Select the module and memory into which the protocol data is to be written, and execute write.
The protocol setting data is written into the module extension parameters.
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
50
6.1 Data Communication