Mitsubishi Electric FX5 User Manual page 137

• Remote password detail setting screen
Item
Built-in User Connection
*1
Ethernet No. Valid Setting
System
Connection Valid
*2
Setting
*1 User connection is a connection for users for communication such as SLMP communication.
*2 System connection is used by the system for communication such as MELSOFT communications (TCP/IP).
*3 Check this checkbox to enable the remote password for the ports for which the communication system is set to "MELSOFT Connection"
in engineering tool.
*4 Check this checkbox to enable the remote password for CPU module direct connection to engineering tool using the built-in Ethernet
port. (Page 18 Direct Connection with Engineering Tool)
*5 Check this checkbox to enable the remote password for access by the file transfer function (FTP server). (Page 101 FILE
TRANSFER FUNCTION (FTP SERVER))
Description
Connection 1 to 8 Select whether the remote password is to be enabled for the
built-in Ethernet port.
(Setting of an unused connection or MELSOFT connection is
ignored.)
MELSOFT Transmission Select whether the remote password is to be enabled for the
*3
Port (TCP/IP) built-in Ethernet port.
MELSOFT Direct
*4
Connection
FTP Transmission Port
*5
(TCP/IP)
Setting range
Check/Do not check
checkbox for the target
connection
Check/Do not check
checkbox for the target
connection
11 SECURITY FUNCTION
11.2 Remote Password
11
135