Mitsubishi Electric FX5 User Manual page 49

■Newly creating the protocol setting data
Newly create the protocol setting data.
[File]  [New]  "Protocol Setting" screen
Item Description
Protocol No. Displays the protocol number used with the dedicated instruction.
Manufacturer Displays the name of the manufacturer of the device for which the protocol is being set.
Model Displays the model of the protocol to be set.
Protocol Name Displays the name of the protocol to be set.
Communication Type Displays the communication type of the protocol to be set.
Send only: Sends one send packet once.
Receive only: If there is a matching packet within up to 16 registered and received packets, it is received.
Send & receive: After sending one send packet, if there is a matching packet within up to 16 registered and received packets, it
is received.
->Send/<-Receive Displays the packet send direction.
->: For send
<-(1) to (16): For receive, the received packet number is displayed in parentheses.
Packet Name Displays the packet name.
Packet Setting Displays the validity of variables in the packet elements and the variable setting state.
If Variable Unset, Elements Unset, or Element Error, the protocol is not written to the CPU module.
No Variable: When there is no variable in the elements
Variable Set: Only when all variables have been set
Variable Unset: When there is an unset variable
Elements Unset: When there are no elements in an editable protocol
Element Error: When elements do not satisfy requirements
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
6.1 Data Communication
6
47