Download  Print this page

Mitsubishi Electric FX5 User Manual Page 65

Melsec iq-f series, ethernet communication.
Hide thumbs

Advertisement

■Receiving side
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of when setting the sending side. (Page 58 Sending side)
2.
Set the "Basic Settings" in the following.
Navigation window[Parameter][FX5UCPU][Module Parameter][Ethernet Port][Basic Settings]
3.
Set the external device configuration in the following.
Navigation window[Parameter][FX5UCPU][Module Parameter][Ethernet Port][Basic Settings][External
Device Configuration]
4.
Write the set parameters to the CPU module. Then reset the CPU module or power off and on the system.
[Online]  [Write to PLC]
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
6.5 Example of Predefined Protocol Communications
6
63

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: