Mitsubishi Electric FX5 User Manual page 116

Setting procedure
The following shows time setting function (SNTP client).
Navigation window  [Parameter]  [FX5UCPU]  [Module Parameter]  [Ethernet Port]  [Application Settings] 
[Time Setting]
Item
Time Setting (SNTP Client)
SNTP Server IP Address
Timer Setting After Power-on and Reset

Execution
Timing
Time Intervals
Specified Time (Hour,
Minute, Day of Week)
*1 To specify the day of the week for the time setting to be executed, set the day, for the time setting not to be executed, under "Day of
Week" to "Not Set". (Time setting is set to be executed every day (all the days are set to "Set") by default.)
When specifying the day of the week, set at least one day of the week to "Set". An error occurs when all the days are set to "Not Set".
The SNTP server must be only one in a network. The time to be output is the same even though multiple
modules in the same system retrieve time from the same SNTP server.
9 TIME SETTING FUNCTION (SNTP CLIENT)
114
Description
Select whether to use the time setting function (SNTP client).
Set the IP address of the SNTP server.
Select whether to execute the time setting function upon
power-on or reset.
Select the execution timing of the time setting.
When "Fixed Scan Interval" is selected, set the time interval
(minute) of time setting executions.
When "Fixed Time" is selected, set the day of the week and
the clock time (hour and minute) for the time setting to be
executed.
Setting range
• Not Use
• Use
(Default: Not Use)
0.0.0.1 to 223.255.255.254
(Default: 0.0.0.1)
• Disable
• Enable
(Default: Disable)
• Fixed Time
• Fixed Scan Interval
(Default: Fixed Time)
1 to 1440
(Default: 1 Minute)
• Hour: 0 to 23 (Default: 12)
• Minute: 0 to 59 (Default: 0)
*1
• Day