Mitsubishi Electric FX5 User Manual page 51

■Protocol Detailed Setting
Set the protocol send/receive parameters.
"Protocol Setting" window  Select a protocol  [Edit]  [Protocol Detailed Setting]
Item
Connected Device Manufacturer
*1
Information
Type
Model
Version
Explanation
Protocol Setting Protocol No.
*1
Information
Protocol Name
Communication Type
Receive Setting Receive Wait Time
Send Setting Standby Time
*1 The setting cannot be changed if the protocol was selected from the predefined protocol library.
Send/receive parameters can be set for multiple protocols by clicking the [Communication Parameter Batch
Setting] button and setting the range of the set protocol numbers, receive settings, and send settings.
Description
Set the protocol maker name.
Set the protocol device type.
Set the protocol model.
Set the protocol device version.
Set a description of the protocol device.
The protocol number for the selected protocol is displayed.
Set the protocol name.
Type Set the protocol communication type.
Set the time for wait after the module enters the receive data wait state.
If communication with the external device is disabled because of a disconnection and matching packet
data is not received within the specified time, the module judges that an error has occurred and cancels
the receive data wait state.
Set the time to wait from when the protocol set for the module enters the execution state to when the
data is actually sent. The time for the external device to enter the receive enable state can be adjusted
with this in respect to the module's send timing.
6 PREDEFINED PROTOCOL SUPPORT FUNCTION
6.1 Data Communication
6
49