Download  Print this page

Ip Address To Be Set For The Cpu Module - Mitsubishi Electric FX5 User Manual

Melsec iq-f series, ethernet communication.
Hide thumbs

Advertisement

12.2

IP address to be set for the CPU module

When the IP address change function is used, the IP address stored in the IP address storage area (CPU module internal
FRAM), not the IP address setting of the module parameter Ethernet port in GX Works3, is set to the CPU module.
When the power of the CPU module is turned OFF and ON or reset is performed, the IP address and other data stored in the
IP address storage area are reflected on the CPU module, and the IP address change function enable flag (SM8498) turns
ON.
[In the case IP address change function is used]
CPU module
IP address
192.168.3.40
Subnet mask pattern
255.255.255.0
Default gateway IP address
192.168.3.254
The value of the IP address
storage area (CPU module
internal FRAM) is set.
[In the case Module parameter Ethernet port setting is used (IP address storage area is cleared)]
CPU module
IP address
192.168.3.39
Subnet mask pattern
255.255.255.0
Default gateway IP address
192.168.3.254
The IP address of the module
parameter Ethernet port setting
is set.
When IP address storage area is cleared (IP address change function enable flag SM8498 is OFF), module parameter
Ethernet port setting is enabled.
Module parameter Ethernet port setting
IP address
192.168.3.39
Subnet mask pattern
255.255.255.0
Default gateway IP address
192.168.3.254
IP address storage area
(CPU module internal FRAM)
IP address
192.168.3.40
Subnet mask pattern
255.255.255.0
Default gateway IP address
192.168.3.254
Module parameter Ethernet port setting
IP address
192.168.3.39
Subnet mask pattern
255.255.255.0
Default gateway IP address
192.168.3.254
IP address storage area
(CPU module internal FRAM)
IP address
Subnet mask pattern
Default gateway IP address
Clear
12 IP ADDRESS CHANGE FUNCTION
12.2 IP address to be set for the CPU module
12
139

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: