Back Panel Removal And Replacement - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
Figure 142: Backguard, Back Panel, Crossmember Cover
1 Backguard
2 Back panel
3 Crossmember cover
Figure 143: Backguard Installed Inside Guide Channels
1 Backguard (or Island Trim)
2 Guide channels (2)
58300000156573_ARA_EN_B
4.6.2

Back Panel Removal and Replacement

Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
Figure 144: Typical Back Panel
1 Screw locations (number varies per panel model)
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove the backguard, per Backguard and Island Trim Removal
and Replacement procedure, page 73.
m
Caution
Be careful not to damage any components at the back of the range
when removing or installing the back panels.
3. Remove and retain the screws from the back panels, and remove
the panel (see Figure 144 and Figure 145, page 75).
4. Replace the back panel if needed.
Page 74 of 119