Thermador PRL304EG Service Manual page 71

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
Figure 137: Control Panel Removed (Attached to Bullnose)
1 Tab
2 Studs (3) on bracket (left side shown)
Figure 138: Removing a Bracket
58300000156573_ARA_EN_B
Figure 139: Bracket (Shown Removed)
14. At the back side of the control panel and bullnose, remove and
retain the screws that secure the bullnose onto the control panel.
15. Pull the bullnose off of the control panel, and replace either or
both of these parts if needed.
16. When installing, it may be easier to affix the brackets to the
bullnose and control panel by placing a piece of double-sided tape
on the bracket. This enables you to have the brackets affixed so
they don't fall out when positioning the control panel / bullnose on
the range (see Figure 140).
Figure 140: Bracket (Shown with Tape)
Page 72 of 119